Home » news » Cyclip Machine Hydraulic System Introduction
Cyclip Machine Hydraulic System Introduction
Sep05,23
Filter chamber, I believe anyone who meets the horizontal filter machine knows an important part of the filter machine filter chamber, which is composed of a filter board, and the middle clamp has a filter cloth, and then the filter chamber The powerful pressure provided by the device becomes a filtration chamber, it is mainly responsible for filtration and separation! When it works, its inside is filled with liquid, so it is also high inside. If there is a small place in the filter chamber that cannot be sealed, it will cause the overall internal pressure of the filter chamber to not high, resulting in flowing along the normal filtration path, thereby affecting the product’s work efficiency and quality. In addition, the filtration will continue to come from an unsteral seal, which not only reduces the quality of the equipment, but also increases the use of devices, resulting in waste of equipment. Therefore, Shanghai’s big Zhang is working properly for the filter machine equipment, and must seal the filter chamber. The filter machine is suitable for metallurgy, gas, paper, coking, pharmaceutical, food, brewing, fine chemical and other industries, due to high pressure, good corrosion resistance, convenient maintenance, and high reliability. The main difference between the Shanghai filter machine and the ordinary box filter machine is to increase the two-layer elastic film (a composite rubber film as an integrated film on both sides of the filter plate. During operation, when the feed is completed, the high pressure fluid medium can inject the membrane plate, and then expand the entire film and press the filter cake, thereby achieving further dehydration of the filter cake, i.e., a pressure filtering process.
Compared with the filter plate of the diaphragm filter (using an intermediate feed separation conduit), there is a significant advantage: during the filtration process, the filter cake formed by the diaphragm filter machine can be uniformly formed in the middle of the filter plate, formed filter cake It is very neat, using the secondary extrusion of the diaphragm filter If the half-angle feed is separated, not only the reasons for the formation of irregular filter cake, but also reduce the amount of feed, thereby affecting the efficiency of the diaphragm filter press. Shanghai large-scale filter machine realizes the dehydration filtering process, which ensures that the filter machine fully exerts the filter effect, which greatly reduces the water content of the filter cake. After the feeding process, the hydrating efficiency of the whole machine is increased by pressing the pressed filter cake, increasing the dryness of the filter cake, reducing pollution, reducing the labor, and some steps can even omit the drying process. If the blast operation is increased before and after the press, the water content of the filter cake can be further reduced. The hydraulic system of the filter machine is a critical part!
